CERTI-SPLIT HAND-SPLIT AND RE-SAWN CEDAR SHAKE ROOFING NUMBER 1 GRADE

Cedar Shakes/Cedar Shingles

Cedar shake roofingOur Cedar Shakes/Cedar Shingles HAVE SPLIT FACES AND SAWN BACKS. CEDAR LOGS ARE FIRST CUT INTO DESIRED LENGTHS. BLANKS OR BOARDS OF PROPER THICKNESS ARE SPLIT AND THEN RUN DIAGONALLY THROUGH A BAND SAW TO PRODUCE TWO TAPERED SHAKES FROM EACH BLANK.

  • 5 bundles to a square based on a 10 inch exposure
  • #1 Blue label – Non Bureau
  • Thickness 1/2″ (medium) and 3/4″ (heavy) minimums
  • Width 4″ minimum
  • Roof exposure 10 inch maximum
  • Clear heartwood; 20% maximum flat grain in each bundle
  • Minimum purchase: 5 bundles
Cedar*Treated Certi-LastPrice
1/2” x 24” Medium$65.00
3/4” x 24” Heavy$75.00
1/2” x 24” Medium CCA$75.00
3/4” x 24” Heavy CCA$85.00

HIP AND RIDGE UNITS

Cedar hip and ridgeCERTI-RIDGE SHINGLE HIP AND RIDGE UNITS ARE PRE-MANUFACTURED LABOR SAVING CAPS FOR HIPS AND RIDGES. THES PRODUCTS ARE MADE FROM THE SAME RED CEDAR RESOURCE AS CERTI-LABEL SHINGLES FOR A HIGH QUALITY PERFECT MATCH.

NUMBER 1 GRADE BLUE LABEL- MANUFACTURED FROM QUALITY NUMBER 1 GRADE, BLUE LABEL CEDAR SHINGLES. WIDTHS 7″ MINIMUM (MEASURED OVER THE TOP AT THE BUTT END).

EACH BUNDLE COVERS 16.67 LINEAL FEET

Cedar  *Treated Certi-Last
 $75.00  $80.00

#4 Undercourse Shingles – Covers 33 lineal feet per Bundle

 Starter- Cedar  Starter-*Treated Certi-Last
 $40.00  $75.00

*The Certi-Last label identifies red cedar shakes and shingles which have been pressure impregnated with wood preservatives to the standards of the Cedar Shake & Shingle Bureau.

Certi-Last is manufactured using Certi-Split cedar shakes, Certigrade cedar shingles and Certi-Sawn cedar shakes.

Application- Shakes and shingles are applied according to standard specifications of the Cedar Shake & Shingle Bureau. The treating company or chemical manufacturer may have special requirements regarding flashing, fasteners, etc.

Cedar Shingles – $75 per bundle

Cedar-sidewall-shingles - before-after

Cedar shinglesCertigrade Red Cedar Shingles-This type of smooth sawn architecturally uniform cedar shingle is perferred for its natural and tailored appearance and is used on traditional and modern residential and non-residential structures. For use on roofs and sidewalls.

  • Number 2 grade, Red Label Perfections
  • 18″ length
  • Thickness is 5/2 1/4″
  • Width 4″ minimum
  • Face must be 11″ clear or better
  • Limited sapwood and flat grain allowed
  • Limited knots and defects allowed above the clear portion
  • Coverage: 4 bundles per square based on a 5 1/2″ exposure
  • Minimum purchase: 5 bundles

Cedar sidewall shinglesCertigrade Cedar Sidewall Shingles- also known as R&R products, manufactured from Number 1 Grade Label Certigrade red cedar shingles, machine re-trimmed for parallel edges and with smooth butts sawn at right angles where a uniform appearance is desired. They are primarily used for sidewall applications.

  • 4″ width minimum
  • 5/2 1/4″ thick
  • Clear heartwood: 100% edge grain; no defects

18″ R&R Natural    $250.00 per box
18″ R&R Grooved   $250.00 per box

Coverage: Box covers 100 square feet based on 14″ exposure