Cedar Roof Shakes and Cedar Shake
Sidewall Siding
East Tennessee Building Supply, Inc.
Cedar Shakes and Shingles
Shop for cedar shakes and shingle roofing from
East Tennessee Building Supply. Wholesale pricing on high-quality cedar roofing
products.
|
 |
|
|
Cedar Shakes and Cedar Shake Siding
for use on Roofs and Sidewalls
|
Our new Facebook button.
Please help promote us! |
|
|
|
 |
 |
 |
|
Certigrade® Shingles
This type of smooth sawn architecturally uniform cedar shingle is preferred for its natural and tailored appearance and is used on traditional and modern residential and non-residential structures. For use on roofs and sidewalls. |
|
|
Quality
The blue CERTI labels (CERTI-Split, CERTI-Last, CERTISawn, etc.) are a mark of quality awarded by the Cedar Shake and Shingle Bureau to several hundred mills in the U.S. and Canada who participate in a stringent quality control program. In order to use the CERTI label, mills must meet quality standards established by the Bureau and undergo regular inspections and audits by independent ICBO-approved quality control agencies. The Bureau offers a 20/25-year CERTI label warranty on qualifying member materials applied by approved installers. |
|
|
 |
 |
 |
|
|
|
|
|
|
Roofing Shakes
|
|
|
All Shakes are #1 Blue Label. |
|
5 bundles to a square based on
an 10 inch exposure |
Cedar Shakes Shingles
Specs & Price |
|
 |
|
1/2" x 24" Medium |
|
|
$ 55.00 per bundle |
|
3/4" x 24" Heavy |
|
|
$ 65.00 per bundle |
|
Hip & Ridge |
|
16.67 lineal feet to bundle |
$ 65.00 per bundle |
|
|
|
|
|
Treated Cedar Shakes
Shingles
Specs & Price |
|
|
|
1/2" x 24 Medium CCA |
|
|
$ 65.00 per bundle |
|
3/4 x 24" Heavy CCA |
|
|
$ 75.00 per bundle |
|
Hip & Ridge |
|
16.67 lineal feet to bundle |
$ 70.00 per bundle |
|
|
|
|
|
Cedar Shake Sidewalls
|
|
|
|
|
|
|
Starter Undercoursing Grade
Specs & Price |
|
#4 Utility Grade - 18"
Undercoursing |
|
A utility grade for undercoursing of double coursed sidewalls only. Not a roofing material and not to be used as a starter course for roofs. |
|
|
Each bundle covers about 33 lineal feet. |
$ 24.95 per bundle |
 |
 |
Sold by bundle |
|
Cedar Shake and
Shingle Bureau Standards required of Mills: |
| Allowed:
unlimited defects, flat grain and sapwood.
|
| Width 2-1/2” minimum
|
| Thickness is 5/2, ¼” thick. (The thickness of 5 butts must be 21/4 inches or greater.)
|
|
|
|
|
|
|
|
|
|
|
|
|
Cedar Shingles
|
|
18" #1 Blue Label ® Perfection
Specs & Price |
|
4 bundles to a square based on 5 1/2" exposure |
|
|
18" #1 Blue Label ® (Perfection) |
$ 85.00 per bundle |
 |
 |
Sold by bundle |
|
Cedar Shake and
Shingle Bureau Standards required of Mills: |
| Allowed:
Clear heartwood; 100% edge grain; no defects |
| Width 4” minimum
|
| Thickness is 5/2, ¼” thick. (The thickness of 5 butts must be 21/4 inches or greater.)
|
| Recommended Use: For walls and roofs on 3:12 pitch and steeper where a premium quality product is desired. |
|
|
|
|
|
|
|
|
|
|
|
|
Cedar Shingles
|
|
18" # 2 Red Label ® Perfection
Specs & Price |
|
4 bundles to a square based on 5 1/2" exposure |
|
|
18" #2 Red Label ® (Perfection) |
$ 55.00 per bundle |
|
|
 |
Sold by bundle |
|
Cedar Shake and
Shingle Bureau Standards required of Mills: |
Allowed:
Limited sapwood and flat grain are allowed.
Limited knots and defects are allowed above the clear portion. |
| Width 4” minimum
|
| Thickness is 5/2, ¼” thick. (The thickness of 5 butts must be 21/4 inches or greater.)
|
| Recommended Use:
For walls and roofs on 3:12 pitch and steeper
where a good quality product is desired. |
|
|
|
|
|
|
|
|
|
|
|
|
R&R - Rebutted & Resided Cedar Shingles
|
|
18" R&R Grooved & Sanded Cedar Shingles
Kiln Dried - Ready to Paint or Stain
#1 Red Label ® Perfection
Specs & Price |
|
Box covers 1 square based on 14" exposure
|
|
|
18" #1 Blue Label ®
R&R Natural |
$ 165.00 per box |
|
|
|
Sold by box
One box covers one square based on a 14 inch exposure
|
|
Cedar Shake and
Shingle Bureau Standards required of Mills: |
| Allowed:
Clear heartwood; 100% edge grain; no defects |
| Width 4” minimum
|
| Thickness is 5/2, ¼” thick. (The thickness of 5 butts must be 21/4 inches or greater.)
|
| Recommended Use:
For walls and roofs on 3:12 pitch and steeper
where a premium quality product is desired. |
|
|
|
|
|
|
|
|
|
|
|
|
R&R - Rebutted & Resided Cedar Shingles
|
|
18" R&R Natural Sanded Cedar Shingles
Kiln Dried - Ready to Paint or Stain
#1 Blue Label ® Perfection
Specs & Price |
|
Box covers 1 square based on 14" exposure
|
|
|
18" #1 Blue Label ®
R&R Natural |
$ 165.00 per box |
|
|
|
Sold by box
One box covers one square based on a 14 inch exposure
|
|
Cedar Shake and
Shingle Bureau Standards required of Mills: |
Allowed:
Limited sapwood and flat grain are allowed.
Limited knots and defects are allowed above the clear portion. |
| Width 4” minimum
|
| Thickness is 5/2, ¼” thick. (The thickness of 5 butts must be 21/4 inches or greater.)
|
| Recommended Use:
For walls and roofs on 3:12 pitch and steeper
where a good quality product is desired. |
|
|
|
|
|
|
|
|
|
|
|
|
| Wood Roofing Material Identification |
| What is the difference between Shingles and Shakes? Wood shingles are machine sawn from a bolt of wood. Wood shakes are thicker and are hand split. Both roof coverings are typically made of western red cedar. |
| Shingle |
Shake |
|
|
|
A shingle, thinner than a shake, is cut tapered and smooth sawn on both faces for a very neat, tailored appearance.
It is cut in a choice of three lengths:
-
16" called Fivex. The thickness at the butt end is 5/2"(5 butts stacked on top of each other total 2 inch- thick).
-
18" called Perfections. The thickness is 5/2-1/4".
-
24" called Royals. The thickness is 4/2".
Grades of Shingles
Number one grade, Blue Label:
-
Lengths 16-inch, 18-inch, 24-inch
-
Width 4"minimum, 14" maximum on 24-inch and 3" on 16-inch and 18-inch
-
Thickness of 16-inch is 5/2" (5 butts together is 2" thick), 18-inch is 5/2 1/4" thick, 24-inch is 4/2" thick.
-
Clear heartwood; 100% edge grain; no defects.
-
Recommended Use—For walls and roofs on 3:12 pitch and steeper where a premium quality product is desired
Number 2 Grade, Red Label:
-
Lengths 16-inch, 18-inch, 24-inch
-
Thickness of 16-inches 5/2", 18-inch is 5/2 1/4", 24-inch is a 4/2";
-
Width 4"minimum, 14" maximum.
-
Face must be 10", 11" and 16"clear or better on 16-inch, 18-inch and 24-inch shingles, respectively. Limited sapwood and flat grain are allowed. Limited knots and defects are allowed above the clear portion.
-
Recommended Use—For walls and roofs on 3:12 pitch and steeper where a good quality product is desired.
Undercoarsing Grade:
-
Lengths 16-inch and 18-inch, thickness 5/2"and 5/2 1/4", respectively
-
Width 2 1/2" minimum, 17" maximum.
-
Unlimited defects, flat grain and sapwood.
-
Recommended Use—For the underlying starter course at eaves and undercoarsing for double course wall construction.
|
Both faces are sawn; like that of a shingle but is cut thicker. This shake has a naturally tailored look of a shingle but is complimented by the sharp shadow line of a shake caused by the thicker buff.
Taper Sawn Cedar Shake
A Certi-Sawn Red Cedar Shake falls between a sawn shingle and a split shake. Both surfaces are sawn but are not precisely manufactured as shingles. With thicker butts this presents a more textured appearance. For use on roofs and sidewalls.
Premium Grade:
Description-Same as Number 1 Grade; 100% edge grain. All other descriptions from Number 1 Grade apply.
Number 1 Grade:
-
Lengths 18-inch, 24-inch
-
Width 4" minimum, 14" maximum
-
Thickness 5/8" nominal (5/8", 3/4", 7/8", yet uniform in each bundle or pallet).
-
Roof Exposure-10" for 24-inch shake; 7 1/2" for 18-inch shake.
-
Wall Exposure-Single course: 11 1/2" for 24-inch shake; 8 1/2" for 18-inch shake.
-
Double course: 18" for 24-inch shake: 14" for 18-inch shake.
-
Recommended Use-For walls or roofs on 4:12 pitch and steeper where a high quality, durable and uniform appearance is desired.
-
Starter-finish Course-Length 15-inch. For use on the underlying starter course at eave lines and for the final course at ridges where trimming would otherwise be necessary and full-length are not needed.
Number 2 Grade:
-
Lengths 18-inch, 24-inch
-
Width 3" minimum, 14" maximum
-
Two thickness- 1/2" to 3/4", 3/4" to 1 1/4" (yet uniform in each bundle or pallet).
-
Lower half of face is clear. Flat and cross grain allowed. Tight knots and other limited defects allowed in top half of shake.
-
Roof Exposure-7 1/2" for 24-inch shake; 5 1/2" for 18-inch shake.
-
Wall Exposure-Single course: 10" for 24-inch shake; 7 1/2" for 18-inch shake.
-
Double course: 11 1/2" for 24-inch shake; 8 1/2 " for 18-inch shake.
-
Recommended Use-For walls or roofs 4:12 pitch and steeper and where good quality appearance is desired.
Handsplit and Resawn Shakes
Standard Grade:
Description-Standard Grade Shakes shall be handsplit and resawn taper-sawn. Shakes shall be edge grain or flat grain or any combination of edge grain and flat grain. Shakes shall be graded from the split or best face. Grain characteristics other than excessive cross grain are not considered defects. Curvature shall not exceed 1 inch from level plane in the length of the shake.
Standard grade shakes, the minimum length of 18-inch and 24-inch shakes shall be 17-inches and 22-inches respectively. Standard grade shakes shall have one thickness. Eighteen-inch and 24-inch shakes shall have a minimum butt thickness of 3/4-inch. Thickness at the exposure line shall be a minimum of one half the minimum specified butt thickness. Width shall be random not narrower than 4-inches and none wider than 8-inches.
Roof Exposure- 18-inch shakes- 7 1/2" maximum; 24-inch shakes 10" maximum
Number 1 Grade:
-
Lengths 18-inch, thickness 1/2" (medium) and 3/4" (heavy) minimums; length 24-inch
-
Thickness 3/8", 1/2" (medium) and 3/4" (heavy) minimums.
-
Width 4" minimum and 14" maximum.
-
Clear heartwood; 20% maximum flat grain.
-
Roof Exposure- 18-inch shakes- 7 1/2" maximum; 24-inch medium and heavy shakes- 10" maximum; 24-inch (3/8") shakes-7 1/2" maximum (5" per UBC).
-
Wall Exposure-Single course: 8 1/2" for 18-inch shake; 11 1/2 " for 24- inch shake. Double course: 14" for 18-inch shake; 18" for 24-inch shake.
-
Recommended Use-For walls and roofs 4:12 pitch and steeper where a high quality appearance and performance are desired.
Premium Grade
-
Lengths 18-inch and 24-inch
-
Width 4" minimum, 14" maximum
-
Thickness 1/2" (medium) and 3/4" (heavy).
-
Clear heartwood; 100% edgegrain; no defects.
-
Roof Exposure-7 1/2" for 18-inch shakes; 10" for 24-inch shakes.
-
Wall Exposure-Single course: 8 1/2" for 18-inch shake; 11 1/2" for 24-inch shake. Double course: 14' for 18-inch shake; 18" for 24-inch shake.
-
Recommended Use-For walls and roofs 4:12 pitch and steeper and where a premium quality product is needed or desired. The 100% edge grain requirement exceeds the national industry standard.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
If after looking through our website, should you have any questions concerning our company or the great products we offer, feel free to contact any of our qualified personnel at (877) 464-7257 or me directly at (423) 571-3547.
I look forward to answering your call.
Charles Lindley, Owner/Manager
|
|
|
|
|
|
|
|
|
|
|
